Home / MCQ Bank / Chemical Engineering
Chemical Engineering Heat Transfer Difficulty: Medium

In a laboratory test run, the rate of drying was found to be 0.5 × 10 -3 kg/m 2 .s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m 2 /kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is

Select the correct option to test your answer:

More Chemical Engineering Questions

With increase in carbon percentage in steel, its In case of liquids, the binary diffusivity is proportional to (where, T = temperature) Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? Aromatics are desired constituents of In a forward feed multiple effect evaporator unit