Select the correct option to test your answer:
Electronics and Communication
Digital Communication
Difficulty: Medium
Consider a binary digital communication system with equally likely 0's and 1's. When binary 0 is transmitted the detector input can lie between the levels -0.25V and +0.25V with equal probability: when binary 1 is transmitted, the voltage at the detector can have any value between 0 and 1 V with equal probability. If the detector has a threshold of 0.2 V (i.e., if the received signal is greater than 0.2 V, the bit is taken as 1), the average bit error probability is
More Electronics and Communication Questions
The relative permeability is less than 1 in
Which of the following is NOT one of the type of amplitude modulation?
In an amplitude modulated system, if the total power is 600 W and the power in carrier is 400 W, then the modulation index is
A thermistor has a resistance temperature coefficient of -2% over a temperature range of 25°C to 50°C. If the resistance is 50 Ω at 25°C. What is the resistance at 45°C ?
Electrical voltage-based telemetering schemes used for short distances must necessarily have