Select the correct option to test your answer:
Chemical Engineering
Heat Transfer
Difficulty: Medium
In a laboratory test run, the rate of drying was found to be 0.5 × 10 -3 kg/m 2 .s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m 2 /kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
More Chemical Engineering Questions
With increase in carbon percentage in steel, its
In case of liquids, the binary diffusivity is proportional to (where, T = temperature)
Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace?
Aromatics are desired constituents of
In a forward feed multiple effect evaporator unit