Select the correct option to test your answer:
Mechanical Engineering
Steam Boilers, Engines, Nozzles And Turbines
Difficulty: Medium
In an experiment to determine dryness fraction of steam, the mass of water separated was 1.2 kg in 15 mts. and the mass of steam passed out in same time was 4.8 kg. Dryness fraction is
More Mechanical Engineering Questions
According to I.B.R., when the thickness of boiler shell (t) is greater than 8 mm, then the diameter of rivet hole (d) is obtained by
The edges of the plates for cylindrical vessels are usually bevelled to an angle of 80° for
The volume of a fluid __________ as the pressure increases.
The discharge through a large rectangular orifice is given by (where H 1 = Height of the liquid above the top of the orifice, H 2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice and C d = Coefficient of discharge)
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be