Select the correct option to test your answer:
More Chemical Engineering Questions
Pressure drop due to pipe fittings can be estimated by the equation, $$\frac{{\Delta {\text{p}}}}{\rho } = 4{\text{f}}.\frac{{{{\text{L}}_{\text{e}}}}}{{\text{D}}}.\frac{{{{\text{V}}^2}}}{{2{\text{gc}}}},$$ where, L e = equivalent length of straight pipeline which will incur the same frictional loss as the fitting and D = diameter of the fitting. The value of $$\frac{{{{\text{L}}_{\text{e}}}}}{{\text{D}}}$$ (dimensionless) for 45° elbow and 180° close return bends would be respectively around
When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used.
At __________ point, all the three phases (i.e.solid, liquid and gas) co-exist.
Efficient burning of anthracite coal requires
The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm 2 /sec.