Home / MCQ Bank / Electronics and Communication

Electronics and Communication Digital Electronics Difficulty: Medium

An ideal local oscillator for microwave frequency measurements, The most suitable microwave source is a The maximum speed of electronic switch can be . . . . . . . . operations per second Which of the following processor possesses a similar instruction of 80486? The input to a channel is a bandpass signal. It is obtained by linearly modulating a sinusoidal carrier with a single-tone signal. The output of the channel due to this input is given by $$y\left( t \right) = \left( {{1 \over {100}}} \right)\cos \left( {100t - {{10}^{ - 6}}} \right)\cos \left( {{{10}^6}t - 1.56} \right)$$ The group delay (t g ) and the phase delay (t p ) in seconds, of the channel are Consider a binary digital communication system with equally likely 0's and 1's. When binary 0 is transmitted the detector input can lie between the levels -0.25V and +0.25V with equal probability: when binary 1 is transmitted, the voltage at the detector can have any value between 0 and 1 V with equal probability. If the detector has a threshold of 0.2 V (i.e., if the received signal is greater than 0.2 V, the bit is taken as 1), the average bit error probability is